Phones answered 24/7Fort Collins, CO
Call (833) 490-5225
Guide

Frozen Pipes in a Fort Collins Cold Snap

Arctic air, Chinook swings and where Fort Collins pipes freeze first: how a freeze turns into a burst, what to do while it is still frozen, and how to prevent it.

Illustration for the guide "Frozen Pipes in a Fort Collins Cold Snap" (Fort Collins, CO)
Short answer

Pipes freeze in Fort Collins where plumbing runs through unheated space: crawl spaces, garage walls, attics, hose bibs and north-facing exterior walls. The damage usually appears on the thaw, when ice that split the pipe melts and water escapes at full pressure into the building.

Key takeaways

  • Fort Collins sits between cold Arctic air arriving from the north and warm Chinook winds off the mountains, which produces sharp temperature swings that stress pipes.
  • A frozen pipe is not the emergency; the thaw is, because a split pipe only discharges once the ice in it melts.
  • Plumbing in unheated space is where freezes begin: crawl spaces, garage walls, attic runs, exterior hose bibs and pipes in uninsulated exterior walls.
  • Buried municipal mains freeze too. In December 2019 a roughly 90-year-old water main on Jefferson Street froze and ruptured, flooding about a dozen businesses and City Hall.
  • Knowing where the main shutoff is, and that it turns, is the single most valuable preparation in a house with any pipe in cold space.
  • A pipe that froze once will freeze again in the same place unless the cold air reaching it is dealt with.

Why do Fort Collins winters hit pipes so hard?

The city sits between cold Arctic air pushing down from the north and warm Chinook winds coming off the mountains, so temperatures can swing sharply. Those swings freeze and thaw plumbing repeatedly rather than holding it at one steady temperature.

A steady deep freeze is in some ways kinder to a building than an unsettled one. Water that freezes and stays frozen expands once and holds. A pattern of hard nights followed by mild, windy afternoons takes the same pipe through the cycle again and again, and each cycle works on the joints, the solder and any spot where the pipe is already strained. This north-versus-Chinook pattern is the broad reason Fort Collins pipes get worked harder than the average winter temperature would suggest.

The seasonal picture here is a freeze season in winter, runoff in spring and storms in summer, and each brings a different kind of water loss. For the freeze season the thing to understand is that the weather does not have to be extreme for days. One cold night with wind driving air into a crawl space vent can be enough if the pipe is sitting in that airflow.

Where does the plumbing in a Fort Collins house freeze first?

Wherever a pipe leaves heated space. In practice that means crawl spaces, garage walls, attic runs, exterior hose bibs, pipes in uninsulated exterior walls and anything serving a room that gets closed off for the winter.

Freezing is about the air around the pipe, not the thermostat in the hallway. A crawl space with open vents sits close to outdoor temperature on a cold night, and a supply line stapled to the underside of the floor in that space has no heat reaching it. A garage with an uninsulated door is the same story, and a pipe running up an exterior wall behind a cabinet gets neither room air nor insulation. The useful exercise is to walk the house asking one question at each fixture: between the water heater and this tap, does the pipe pass through anywhere I would not want to sit in a coat?

Vacant and partly used buildings are the other pattern. A guest room with a closed door and a shut-off vent, a basement bathroom nobody uses in winter, a rental between tenants, a commercial unit heated only during business hours: all of them keep water in pipes in cold air for long stretches with nobody there to notice. In those buildings the discovery is usually made by a neighbor, a passer-by or a water bill, long after the water started.

Where cold reaches plumbing, and what helps
LocationWhy it freezesWhat reduces the risk
Crawl spaceVents let outside air straight onto supply linesInsulate the lines, close or baffle vents for the season, seal gaps at the rim
Garage wallUninsulated door and wall, little or no heatInsulate the pipe run, keep the door shut in a cold snap
Attic runAbove the insulation, so it sits at attic temperatureInsulate below and around the pipe, never above it only
Exterior hose bibExposed to wind, often holds water in the stemDisconnect hoses in autumn, drain and cover, fit a frost-proof bib
Exterior wall cavityThin or missing insulation on the cold side of the pipeOpen cabinet doors in a cold snap, add insulation on the outside face
Closed-off roomNo air movement and no heat for daysKeep the door open and a vent flowing during freeze weather

Why does the water appear when things warm up?

Ice expands and splits the pipe while it is frozen, but the ice itself plugs the hole. Nothing escapes until the plug melts. That is why many burst-pipe calls come on the first mild afternoon after a cold snap rather than during it.

This single fact changes what you do with a frozen pipe. A tap that has stopped running in cold weather is a warning that the house has given you in advance, and the right response is to find the shutoff and look at the pipe before you warm anything. If the pipe has already split, thawing it with the water on turns a quiet problem into pressurised water inside a wall. Shutting the water off first costs you nothing and removes that possibility.

It also explains a peculiar timing pattern that catches people out: the freeze happens overnight while everyone is asleep, nobody uses that bathroom in the morning, and the water arrives at lunchtime. By then it may have been running for hours. Water at full supply pressure moves through a building quickly, down inside stud cavities, along the top of ceilings and out under flooring, which is why a burst pipe often damages rooms that are nowhere near the pipe.

What do I do while the pipe is still frozen?

Shut the water off at the main, open the nearest tap so meltwater has somewhere to go, and warm the pipe gently from the heated side. Never use an open flame, and do not leave a heat source running unattended in a crawl space.

Gentle means a hair dryer, a heat gun on low or a space heater placed to warm the air around the pipe, applied from the part of the pipe closest to the fixture and worked back toward the frozen section. Warming the middle of an ice plug first can trap meltwater between two plugs with nowhere to expand. An open flame near old framing, insulation or a wall cavity is how a water problem becomes a fire, and it is never worth it.

Open the tap the pipe serves. Running water will not freeze as readily, and once the plug starts to give, an open tap tells you immediately that flow has returned and lets pressure escape at the fixture rather than at the weakest point in the pipe. Then watch the ceiling below and the wall around for staining while the thaw proceeds. If water appears, keep the main off and call for help rather than chasing it with towels: our frozen pipe damage in cold snaps page sets out what the response looks like.

Where is the shutoff, and does it still turn?

Find it before you need it. In most houses it is where the service line enters, often in a basement, crawl space or utility area near the front wall, and in older buildings it may not have been turned in years.

A valve that has sat untouched for a decade can seize, round off or weep when you finally ask it to close. Checking it is a five-minute job on a dry afternoon: locate it, confirm you can reach it without moving stored boxes, turn it closed and open again, and leave something nearby that tells the next person it is there. If it will not turn, that is a plumbing job worth doing before the first hard freeze rather than during one.

In a rented or shared building, add one more step and establish who is allowed to operate the shutoff and how they are reached at two in the morning. A tenant who knows exactly where the valve is but has no key to the utility room is in the same position as a tenant who does not know. Every minute of pressurised water adds to the drying job, and the minutes lost here are the easiest ones to buy back.

Can a city water main freeze, not just house pipes?

It can. In December 2019 a roughly 90-year-old water main on Jefferson Street froze and ruptured, flooding about a dozen businesses and City Hall. Buried infrastructure of that age is its own flooding source, independent of anything inside a building.

For a downtown business that is a different kind of exposure, because nothing you do to your own plumbing affects it. What you can control is readiness: knowing where your low floor area is, keeping stock and records off the floor, having the shutoff and the electrical panel accessible, and knowing who to call when water is arriving from the street rather than from your own ceiling. A commercial loss of that kind is handled as commercial flood water restoration because the scope includes stock, documents and the business interruption, not just the structure.

The age of the buried network is also a reason the older core sees winter water losses that newer growth-era areas do not. Much of Old Town dates from the early twentieth century and earlier, and the pipes under and inside those buildings are often of a similar vintage. Our guide to Old Town basement flooding and storm sewers covers the summer half of that same story.

How much damage does a frozen pipe actually do?

It depends almost entirely on how long the water ran and where it started. A split on a top-floor supply line can wet three levels; one in a crawl space may only wet the subfloor above it and the ground below.

Water goes down and sideways. From a split inside a wall it runs down the cavity to the bottom plate, then along the floor framing until it finds a path through, which is often a gap at a pipe or a light fitting. That is why the first visible sign is frequently a stain on a ceiling in a room with no plumbing in it, and why ceiling and drywall water damage is so often part of a freeze claim. A sagging or heavy ceiling is a safety matter: keep people out from under it.

The part people underestimate is the water that never showed. Insulation in a wall cavity holds a great deal of water and dries very slowly, and a cavity that stays wet is where a mold problem begins over the following weeks. Finding it takes moisture meters and thermal imaging rather than looking, which is the job of hidden water leak detection. Drying is then measured rather than estimated, with readings repeated until the materials are back to a normal level.

What prevents a repeat next winter?

Deal with the cold air, not just the pipe. A pipe that froze once is in a spot where cold reaches it, and insulation on the pipe alone slows the freeze rather than preventing it if the air around it keeps dropping.

The durable fixes are the dull ones. Air-seal the crawl space rim and the gaps where pipes pass through to unheated areas, insulate the run itself, and reduce the airflow that is carrying cold onto it. Disconnect and drain hose bibs in autumn, because a hose left attached holds water in the stem where it will freeze and crack the valve behind the wall. Where a pipe simply should not be where it is, rerouting it into heated space during another repair is often cheaper than it sounds.

Then plan for the cold snap itself. Leave cabinet doors open under sinks on exterior walls, keep interior doors open so heat moves, do not drop the thermostat to its minimum when you travel in winter, and have somebody check an empty building daily during a freeze. If a pipe does let go, shut the water off and call (833) 490-5225; crews are dispatched around the clock as fast as one becomes available, and the clock on drying starts the moment the water stops.

Frequently asked questions

Should I leave taps dripping during a cold snap?

A slow run on a tap served by a pipe in cold space is a reasonable short-term measure, because moving water is slower to freeze and an open tap gives expanding ice somewhere to push. It is a stopgap, not a fix, and it only helps the pipe feeding that particular tap. If you are relying on it every winter, the real answer is insulation and air-sealing on that run. Also keep in mind it does nothing for a pipe that is already plugged with ice.

My tap ran again after a freeze and nothing leaked. Am I in the clear?

Probably, but check the run over the next few days rather than assuming. A hairline split can weep slowly, and the sign is a damp patch, a musty smell or a stain appearing on a ceiling below rather than a visible spray. Look at the pipe itself where you can see it, feel along it for moisture, and watch the ceiling under any concealed section. A pipe that froze also tells you that location will freeze again next winter.

Does homeowners insurance cover a frozen pipe?

Sudden and accidental water damage from a pipe failure is the pattern home policies generally address, while gradual leaks and lack of maintenance generally are not. Policies differ and the wording in your own form decides your claim, so read the water section and the exclusions. Some forms expect reasonable steps to keep a building heated. Our guide on water damage insurance claims covers how to document the loss.

Can I thaw a pipe with a propane torch if I am careful?

No. An open flame against a pipe inside a wall, a crawl space or near insulation and old framing is a fire risk that is not worth taking, and it can also damage the pipe or its joints badly enough to turn a frozen line into a burst one. Use a hair dryer, a heat gun on a low setting or a space heater warming the surrounding air, work from the fixture side back, and do not leave any heat source running unattended.

Why did my pipes freeze when it was not even that cold?

Wind and exposure matter as much as the temperature reading. Air moving through a crawl space vent or an open garage carries heat away from a pipe far faster than still air at the same temperature, so a windy night in the twenties can do what a calm night in the teens does not. Sharp swings between Arctic air and warm Chinook conditions also mean a pipe can be cycled through freezing repeatedly, which is harder on it than one steady cold spell.

What about a vacation home or a building that sits empty?

An empty building is the worst case because nothing stops the water until somebody arrives. If it will be unoccupied through a freeze, either keep the heat at a genuine working level and have somebody check it daily, or shut the water off at the main and drain the system down. Do not leave the thermostat at its lowest setting and hope. Also make sure whoever checks the building knows where the shutoff is and can get to it.

Sources

  1. City of Fort Collins

This guide is general information for Larimer County homeowners, not a substitute for an on-site inspection. Prices are estimates. See our disclaimer.

Still stuck? We pick up 24/7.

If it's an emergency, call now. For non-urgent help, send the form and we'll call you back.

Keep reading

More guides

Is my Fort Collins home in a floodplain?

Fort Collins Utilities holds floodplain status for a specific property, and that is where the question is settled rather than by a neighbor or a listing.

WhatsApp