How long can an appliance leak go unnoticed?
A slow leak behind or under an appliance commonly runs for weeks or months, because the water never reaches open floor. The first sign is usually the flooring or the cabinet failing rather than visible water, which is why the wet area is already wide by then.
The reason is simple enclosure. A dishwasher sits in a sealed pocket, a fridge covers the floor beneath it, and a washing machine stands against the wall its connections pass through. Small volumes of water in those places have nowhere to evaporate to, so the material stays wet continuously rather than drying between leaks.
That continuous wetness is what makes a long slow leak more serious than a short fast one, even though the total volume is lower. Fibreboard and chipboard lose their structure, subfloor adhesives let go, and enclosed damp space is where growth starts. If you are reading these signs and cannot find a source, hidden water leak detection is the right next step rather than pulling a kitchen apart.
Can kitchen cabinets be saved after a leak?
Solid timber and plywood carcasses usually can, if the drying starts before they delaminate. Chipboard and fibreboard bases, kick boards and shelving that have swollen generally cannot, because the material has lost its structure and will not recover as it dries.
The practical test is whether the board is still holding together. A plywood base that has been wet for a day will dry and stay flat. A chipboard base that has swollen at an edge has already expanded in a way that does not reverse, and it will be soft under weight even once the meter says dry. Doors and drawer fronts often survive while the carcass under them does not.
Where a run is partly affected, drying in place with the kick boards off and small vents into the sealed toe space saves a great deal of cabinetry that would otherwise be pulled out. That is worth asking for. It takes longer than demolition and leaves you with your kitchen, and it only works if the measurements say the material is still sound.
What should I check behind my appliances?
The braided supply hoses on a washing machine, the drain hose where it enters the standpipe, the small line feeding an ice maker, and the floor and wall base behind each unit. Any staining, corrosion, kinking or bulging is a reason to replace the part.
Supply hoses age from the inside and give very little warning. A bulge, a rust stain at the crimp, or a hose that has been in service for many years is a replacement rather than a monitoring job, and it is the cheapest water-damage prevention available to a household. Turning off the washing machine valves when you go away is free and removes the risk entirely while you are gone.
For a dishwasher, look at the base of the door seal and shine a torch into the cabinets on each side, at floor level, every so often. For a fridge with an ice maker, pull it out once a year and look at the line and the floor beneath. Three minutes each does more good than any device, because what you are looking for is the slow leak that nothing else will catch.
What drives the size of an appliance leak job?
How long it ran, whether it reached cabinets and subfloor or only the surface, how many cabinets are involved, whether a floor below is affected, and whether growth has started. The scope and the price are explained and approved before work begins.
A hose failure caught in the first minutes is typically floor, kick board and one cabinet. A months-old drip under a fridge is subfloor, flooring, cabinet bases and sometimes framing, with an inspection for growth on top. Where the appliance sits upstairs, the ceiling and insulation below it are added, and that roughly doubles the work compared with the same failure at ground level.
Access matters as well, since built-in appliances and stone counters limit what can be removed without a joiner. This site carries no figures at all, because the variables above cannot be judged from a description. What you should get is a written scope naming each item and why, with the price explained and your approval before any work starts. Phones are answered on (833) 490-5225 around the clock.
Is an appliance leak covered by insurance?
A sudden failure and a long-standing slow leak are often treated differently, so coverage varies by policy and by how long the leak ran. Document the source and the damage before anything is moved, and ask your own insurer what your policy includes.
This is the water loss where the question of duration comes up most, so the record should answer it before it is asked. Photograph the failed hose or connection in place, the water, the floor and the inside of the cabinets, and note when you first noticed any sign, even an old one. Keep the failed part itself.
A crew's documentation supports that: dated photographs, moisture readings across the whole run, and a list of what was removed and why. For how a water claim is usually put together in this state, and where consumer complaints are directed, see water damage insurance claims in Colorado.