How often has the Cache la Poudre flooded?
State floodplain reports list notable floods in 1844, 1864, 1884, 1891, 1904, 1923, 1930, 1938, 1951, 1961, 1983 and 1995. The May 1904 flood was the largest at about 57,000 cubic feet per second, and about 150 houses were swept from their foundations.
The 1864 flood destroyed the original Camp Collins, which is part of why the settlement moved to the site the city grew from. Laporte, just upriver, is considered the oldest community in Larimer County, tied to Antoine Janis and a cabin dating to about 1858. The river has been shaping where people put buildings here for as long as there have been buildings.
Within the modern city the reports note that Poudre flooding has mainly hit farmland, roads and irrigation works. That is a useful correction to a common fear. A Poudre flood is far more likely to take out a county road, a ditch headgate and a row of outbuildings than to fill a subdivision, and the restoration work follows that pattern.
What has the city done about the Poudre floodplain?
The Poudre floodplain was first mapped in 1975. The city joined the National Flood Insurance Program and adopted floodplain regulations in 1979, and created its Stormwater Utility in 1980. Fort Collins Utilities can tell you the floodplain status of a specific property.
Those three dates are worth knowing if you own an older building. Anything built before the mid-1970s went up without a mapped floodplain to build against, and anything before 1979 went up without the regulations. That does not mean an older building is unsafe, but it does mean its floor level was set by whoever built it rather than by a rule.
If you are rebuilding after a loss, the city's flood awareness brochure advises building 18 inches above the 100-year flood elevation. That is the kind of decision worth making once, at the point where the floor is going back in, rather than after the next high water. The guide on floodplain status for a Fort Collins home covers who to ask and what to ask for.
Why is river silt a problem after the water has gone?
Silt holds water. A layer of river sediment on a floor or against a joist keeps that material wet long after the room looks dry, and it is also what makes the smell. Removing sediment is part of the restoration, not a tidy-up to do later.
Fine sediment packs into every gap: under a vapour barrier, behind a baseboard, into the gap between a joist and the subfloor, into the fins of a furnace. Dried silt looks harmless and behaves like a wick. Drying equipment run over a silted floor will take far longer and may never get the readings down.
It also carries whatever the river picked up: agricultural runoff, road grit, fuel, animal waste. That is why crews treat river flood water as contaminated and why porous materials with sediment in them are removed rather than dried. The ones that stay are cleaned first and dried second, in that order every time.
What decides the price of a Poudre flood job?
The volume of sediment, the number and type of spaces involved, how the building is accessed, and whether anything is heated. Sediment and crawl spaces add labor more than equipment. No figure is published here, because a scope this variable needs someone on the property.
A clean-water job is mostly equipment days. A river job is mostly hands. Shovelling and flushing silt out of a crawl space, lifting and replacing a vapour barrier, cleaning joists by hand and bagging material out through a small hatch all take time that no machine shortens. Distance matters too, because a property out past the city on a county road costs a crew travel on every visit.
The other drivers are how long the water stood, how many outbuildings are in scope, whether mechanical plant was submerged, and whether the space can be heated while it dries. Fort Collins Water Damage Restoration walks the property, writes the scope, explains it and gets your approval before work starts, and raises anything new as a change rather than at the end.
What should a property owner do while the river is still high?
Nothing that involves going near the water. Move vehicles, animals and stored chemicals to higher ground if there is time, turn off power to flooded outbuildings at the panel if you can do it dry, and then wait. Photograph everything once it is safe.
Moving water in a river is not comparable to standing water in a basement, and people drown in it every year across the Front Range. A pump house, a ditch bank and a low-water crossing are the three places not to be. Nothing in an outbuilding is worth walking into current for.
Once the water drops, the clock starts on the inside work. Photograph the high-water marks before you move anything, keep damaged materials until your insurer has seen them, and call for extraction. The page on flood water extraction and pumping explains what the first visit does, and (833) 490-5225 is answered at any hour.